|
This unique fastening system is designed to replace the old labor-intensive hand lacing method of assembling and connecting Gabion structures.
This fastener is designed to be used with manual pliers or a hand-held pneumatic gun with magazine feed, both available from a Tiger Tite authorized representative.
 |
- 60% reduction in lacing labor
- Shortened overall construction time
- Uniform seams
- Consistent quality of construction
- Increased structural integrity
- Easier visual inspection
- Equals or exceeds strength of existing lacing method
- None
|
Approved by: U. S. Army Corps of Engineers, Federal Highway Administration, California Department of Transportation, Pennsylvania Department of Transportation and other Federal, State and Local Agencies.
C-Ring
- Open dimension - 1-1/2 inches (381 cm)
- Closure inside dimension - 9/16 - 5/8 inch (143 - 1.59 cm)
- Wire Diameter - 120 inch (11 gauge), 3.05 mm
- Packaging - 1,600 pieces per box, 40 pieces per strip, 96 boxes per pallet
- Weight per box - 16 lbs. (73 kilograms)
Material Specifications
- - The galvanized rings shall conform to ASTM A 641-92 for zinc coatings, ASTM A 764-93 for chemical and mechanical specifications, and ASTM E 8/MPT 2004 for tensile strength requirements.
- - Shall conform to ASTM A 313 type 302, Class I and ASTM E 8/MPT 2004 for tensile strength requirements.
- - Shall conform to ASTM B 341 and shall have a minimum weight of aluminum coating of 32 oz/square foot.
Hog Rings are compatible with Spenax SC-50 Pneumatic Fastening Tool.
|
